High Pressure & Push-in Fitting Solutions

We offer Compressed Air Fitting system which is exclusively designed for pneumatics to join two tubes or thin-walled pipes together. These fittings are perfect connections from compressor receiver to air line service components that require occasional disassembly or partial removal for maintenance. They do not require any special tools or skills to operate. They work excellently at elevated pressures and with toxic gases. A compressed air fitting system do not require soldering and thus can be installed quickly and easily, compared with other installation methods, time savings of at least 50% are easily achievable.

Our experienced and compressed air fitting systems expertise can help you create the perfect air compressor solution for you and your business, including everything from the installation of air compressor air fitting system right down to the service and maintenance on time. Whether you're in construction or any other industry, we're certain to have perfect air compressor for you that the fittings to complement it.

An integral part of compressed air fitting ensuring your compressor system runs properly and efficiently. Air compressor fittings can negatively affect functionality of your compressor if they aren't of good quality, and they can even cause leakage, corrosion and other issues, costing you expense. Using high quality parts, such as those from John Guest and Eqo Fluids, can avoid failure such as these. Whether you require high pressure or push-in fitting solution, we can help.


  • Specially designed for pneumatics
  • Suitable for plastic and soft metal tubes
  • Easy and fast installation and save 50% of your installation time
  • No special tools needed
  • Quality Manufacturer - ISO 9001 listed since 1989
  • Excellent flow characteristics
  • Grips perfectly before it seals
  • Quick disconnection and reusable
  • Collect cover prevents accidental disconnection and allows colour coding
  • Fittings with prefix PM or PI are produced exclusively with Food and Drug Administration approved materials and are hence recommended for food quality applications.

Our offered products under this category are:

Push-In Fittings

Push-in fittings are a quick and economical way to make an ideal connection for your house appliances like refrigerator, spigots or faucets or for your reverse osmosis filters. These Compressed Air fittings are available from 4 mm to 32 mm size. These ranges of push-in fittings and pipe provide the perfect connection from compressor receiver to Compressed air line service components through to total ring main and take off points. Without preparing threaded pipe or solvent, all the connections can be excellently made with a simple push-in action. They do not contain lead and therefore safe for all drinking water applications, as well as being simple in design are very easy to install and put in use.


  • No soldering is required to make repairs, which reduces the risk of fire and thus these fittings safe for working in confined areas
  • Easy to disassemble without damaging the pipe or fittings
  • Anti-corrosion
  • Leakage proof
  • Pipe flexibility allows the cabling of pipe through less accessible areas
  • Lead-free and non-toxic
  • Being elastic which reduces the possibility of bursting under extreme freezing conditions
  • Greatly reduces installation time especially in confined spaces
  • No tools or special skills needed to install fittings

High Pressure Fittings

High Pressure fittings are ideal connections which can are firmly attached to their position under high pressure ranges up to 70 bar. All Compressed Air fittings are offered in sizes 20,25, 32, 40, 50 and 63mm, whether this be high or low pressure, the compressed air fitting large diameter is offered in 90,110, 140 and 160mm. This Compressed Air fitting system is durable, robust in design and resistant against corrosion and is extremely cost effective. Our range includes of push fit aluminum fittings and powder coated aluminum tube in 4 and 6 meter lengths.


  • Have seals and stainless steel grab rings
  • Fitted with smooth bore that ensures large air flows
  • Can be easily installed
  • Less installation time
  • Resistant against corrosion
  • Long lasting
  • Low installation and maintenance cost

Miniature LM Fittings

Miniature LM Fittings are specifically designed fittings for miniature pneumatics applications. These fittings are suitably used with plastic (Polyethylene, Nylon and Polyurethane) and soft metal (copper and mild steel) tubes having an outside diameter of 4mm +0.05/ -0.07. M3 and M5 threaded ends are specially designed to be tightened manually by hands that give leakage proof solution.

We offer following products under this range...

  • Straight Adaptor - Metric Thread
  • Straight Adaptor
  • Equal Straight Connector
  • Equal Tee
  • Equal Elbow