PRODUCT

vp_product

The VPLog-i measures AC currents up to 3200A (true-rms on a single phase power cable). The VPLog-i is very easy to use: just wrap around one of the three phases and close the snap fitting. It offers the best solution for your mobile power measurements. The VPLog-i is the only sensor on the market that offers both 4..20mA and pulse outputs.

The VP Leak Detector is a practical tool for any leak detection or mechanical troubleshooting program. Simple to use – find compressed air and steam leaks and prevent machinery failure with this unique instrument.

The ultrasonic thickness gauge is used to measure wall thickness, which is key
information to calculate the exact inner pipe diameter.

The energy meter for compressed air™

The VPFlowMate in-line is an easy to use compresed air flow meter, for point of use measurement, leakage management in small compressed air networks. We offer 3 types with different measurement ranges. it comes standard with a bright LCD display, on which you can read the actual flow and totalizer.

The VPFlowScope DP is designed for wet air. When properly installed and maintained, it can be used in the discharge of the compressor. The VPFlowScope DP is fully compatible with the standard VPFlowScope, which means that it is easy to install and operate without and additional training.

The VPFlowScope measures mass flow, temperature and pressure simultaneously. It’s the ultimate compressed air audit tool, used by leading auditors worldwide. The bright blue LCD display provides real-time information and with the built-in data logger, you can make recordings for a certain period of time. VPStudio software can be used for real-time measurements to process data and to print reports.

The VPFlowScope® in-line is the new standard for point of use measurement. It measures mass flow, temperature and pressure which is key data for point of use compressed air energy management. The bright blue display provides real-time information, and with the built-in data  logger, recording is as easy as taking a picture.

The VPFlowTerminal is a plug & play wall mount display with built-in power supply and 2 million point data logger.

The new generation VPFlowTerminal has five sensor inputs: one input for a VPFlowMate or VPFlowScope mass flow meter, and four generic analog inputs. With this new display you have all data together in one display and logged in one data logger. This makes the collection and analysis of your compressed air data easier and quicker!

With VPStudio, you can configure all VPInstruments products, view real time measurements and retrieve data log sessions.

 

VPStudio enables you to view data in any unit both SI and Imperial. You can schedule your data log session, set logging intervals and adjust flow meter parameters. It communicates via your PC’s USB port.

VPVision offers you the complete monitoring solution for... more

Image:

The hot tap drill is the universal tool to install your insertion flow meter in any compressed air system. In only 30 minutes you can drill a hole and install your flow meter. Using a hot tap saddle and a hot tap drill, you can create a new installation point without depressurizing your installation.

Image:

The VP Leak Detector is a practical tool for any leak detection or mechanical troubleshooting program. Simple to use – find compressed air and steam leaks and prevent machinery failure with this unique instrument.

Image:

The Modbus junction box can be used for quick interconnection between VPFlowScope sensor modules in a Modbus chain.

This junction box contains a special PCB with screw terminals for the trunk cable and the derivation cable. Add one for every Modbus device in the chain.